Product Description|PRODUCT DESCRIPTION

This product is made from a new type of polymer as the base material, combined with a curing agent and various additives, resulting in a waterproof material that is colorless and transparent, weather-resistant, wear-resistant, environmentally friendly, and water-resistant.

Product Features|PRODUCT FEATURES

◆ Colorless and transparent, does not damage the original wall decoration after application;

◆ Resistant to high and low temperatures, non-toxic, environmentally friendly, and water-resistant;

◆ The coating film has good strength and elongation;

◆ Can be sprayed, brushed, applied with a roller or trowel directly onto the wall, retaining the original surface layer, convenient for construction;

◆ Has strong hardness and scratch resistance.

Scope of Application|SCOPE OF APPLICATION

Suitable for waterproofing and leak repair on various wall and floor tile surfaces.

Construction Guide|CONSTRUCTION GUIDE

Construction Method:

① Surface cleaning → Remove oil stains from the tile surface with a cleaner → Remove mold release agent from the tile surface with powder and a towel → Rinse tile surface dust with water → Dry tile with a blower to ensure the surface is dry;

② If there are defects in the tile joints, fill with waterproof filler or seam sealer;

③ Preparation: A component : B component = 1:1, mix evenly (produces a large number of tiny bubbles);

④ Coating: Apply with a wool brush. Do not reapply after 10 minutes to avoid brush marks;

⑤ Generally apply two coats, letting the first coat dry before applying the second coat.

Storage and Packaging:

① The product should be stored sealed in a cool, ventilated, and dry place above 5°C, with a shelf life of 12 months;

② Packaging specification: 1L/barrel.

Precautions:

① The mixed material should be used within 15 minutes (25°C);

② The surface must be dry, and cannot come into contact with standing water within 3 hours of application;

③ Not suitable for marble surfaces;

④ For areas exposed to long-term water immersion, such as bathrooms and sinks, both horizontal and vertical surfaces must be fully coated.