Product Description | PRODUCT DESCRIPTION

Scope of application: Suitable for painting exterior walls and masonry

Product Features | PRODUCT FEATURES

◆Topcoat has excellent weather resistance, strong mildew and algae resistance

◆Paint film is smooth and durable, enhancing the wall paint

◆Waterproof and breathable,

◆Primer strong alkali resistance

◆ Stain resistance, high

◆Resistant to pan-salting

scene display| SCENE DISPLAY

Construction Guide| CONSTRUCTION GUIDE

theoretical paint consumption (calculated by 30< dry film span style="">μm):

●12-15 square meters /liter/ single pass (or 10-12 square meters/kg/single pass)

● The actual coating area varies depending on the substrate surface roughness and dryness, construction method, and dilution ratio,

dilution:

● To achieve the best application effect, no more than 10-20% < span style=""> (volume ratio) of water diluted with clean water can be used according to actual conditions

● Stir evenly before use for optimal filtration

drying time (calculated at 25°C):

surface drying: 30 minutes hard drying: 120 minutes recoat: at least 2 hours. In humid weather or low humidity, the time

Substrate treatment:

Surface treatment: When building a new wall, remove surface dust, grease, and loose mortar. If there are any voids, repair them promptly to ensure the wall is tidy, dry, and even. Recoat the wall, scrape off the old wall with unstable paint film, remove surface dust, powder, and impurities, level and sand, clean, and dry thoroughly.

Surface Condition: Ensure the surface moisture of the precoatd substrate is less than 10% , pH value less than 10. The surface of the precoat substrate is firm, dry, clean, flat, and free of loose substances.

Construction conditions:

Please do not apply in humid or cold weather (temperature below 5), otherwise the desired coating effect will not be achieved.

Maintenance time: 7 days / 25°C; In humid weather or when temperatures are too low, extend the time appropriately to achieve the desired paint film effect.

cleaning:

After pausing during painting and finishing the application, promptly wash all instruments

Safety Matters:

1. Please be sure to carefully read the application instructions on the product packaging and label before use to ensure reliable and satisfactory coating results

2. Before starting operation and use, open all doors and windows as much as possible to ensure sufficient ventilation in the construction area

3. If you have allergic skin, always wear protective equipment during use; If it accidentally gets into your eyes, rinse immediately with plenty of water and seek medical attention

4. Do not allow children or pets into the construction area and store the product out of their reach; If it accidentally gets into the area, rinse immediately with plenty of water and seek medical attention